openGrid - Angle connector

Connect your openGrid panels at 90° angle with these angle connectors. Print some connector, some openGrid panels and some openGrid connectors (or lite connectors), and connect all the parts together.

With these angle connectors, you can make open boxes, crates, …

Works with standard and lite (with a small offset) openGrid panels. The upside down box shown on the image is made of one standard 7x7 openGrid panel on the top and four 7x2 openGrid Lite panels on the sides.

To connect them :

• on the top : two 1-1_7x connectors and two 3-3_7x connectors
• on the sides : four 2-1_2x connectors