July 9, 2025
Description
This is a plug for the tab mounting holes on a Blue Ox baseplate. It prevents debris from collecting in the hole when the tab is not in place, e.g., when your toad is not being towed.
Two are needed, but you knew that ;p
I printed these at 0.2mm structural in Overture TPU using the “Generic FLEX” profile in PrusaSlicer. I found the textured build plate worked best.
This model is sized for TPU; a PLA plug needs to be a little smaller as it doesn't flex.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
dnl42
