Corner radius jigs - Radius from 5 to 120mm

Two router jigs (a small and a big one), that are both a mix of all the good ideas from other router jigs gathered on the internet, for what could be the ultimate radius jig !

- Normal base : from 5 to 60mm radius
- BIG base : from 5 to 120mm radius
- BIG base that you can print in two parts (as inspired by @eponra) for smaller printer.
 

Edit : 
For the BIG base that you can print in two parts :

The part 1 is always the same but the part 2 is exported with different tolerances ( 0, 0.1, 0.2, 03, 0.4mm).
- You can print the test_tolerance - part_A, and the try the test_tolerance - part_B - 0,*mm. 
- The part A stay the same.

Features :

• Minimal filament use for printing the replaceable radius
• Compatible with guide rails clamp
• Easy to print and no support
• Back handle
• Fusion 360 files with radius parameter to create your own personalized radius
• Reenforced stops with m4 bolt
• Looks like some funny character's face :)

Don't hesitate to ask if you have any question about the  !