A set of order trackers for WH40k Astra Militarum armies. There are two versions of the dice, version 1 uses the official terms, and version 2 uses the effects.
Print on 0.2 layer profile
While this is an original model I took inspiration from here:
https://makerworld.com/en/models/1219274-astra-militarum-order-dice-set-for-warhammer-10th?from=search#profileId-1235790
Versions 1.3 of Cap, and Cylinder are done.
Changelog (v 1.3):
- Screw on the Cap had threads adjusted, they now fit snug with low resistance.
- Cylinder- The insert slots have been adjusted so that they sit flush with top of the cylinder.
- Cylinder- changed the diameter of the bullet slots to be tighter, to prevent bullets from being able to spin when inserted.
- Speed Loader design- I Conceptualized this while test printing slices of the Cylinder it has the same measurements as the Cylinder but not its height (leaving the bullets mostly exposed).
- As of this version removing the warning from this post as I am currently satisfied with this model.
Dayleno
