Full 75% keyboard keycap set for Cherry MX, AULA F75

Full keycap set for a 75% keyboard, all keycaps fit on AULA F5 but untested on other keyboards. You can add text in your slicer if you want.

I recommend printing a few test keycaps to make sure they fit before printing everything else.

Amounts:
67 keycap.stl
5 wide.stl
2 wider.stl
2 widerr.stl
1 widerrr.stl
1 widerrrr.stl
1 spacebar light.stl
1 knob.stl or knobier.stl

Dimensions:
17 mm | keycap.stl
23 mm | wide.stl
27 mm | wider.stl
33 mm | widerr.stl
37 mm | widerrr.stl
43 mm | widerrrr.stl
117 mm | spacebar light.stl
27 mm | diameter at its widest point knob.stl or knobier.stl
 

Print settings for the keys:

Layer height: 0.08 (or whatever your printer's lowest is)
Orientation: laying flat on the keys largest top face
Wall Loops/Perimeters: 10000
Infill: 69%
Supports: none

Ask in the comments about further settings you are unsure about

Print settings for the Knob:

Layer height: 0.08-0.2
Orientation: laying flat on the knobs largest top face with the hole facing up
Wall Loops/Perimeters: 2
Supports: none
Infill: 5-20, Optional pattern (I used gyroid)
Bottom surface layers: either 3 or none. No bottom layers give it a very cool look in my opinion where the infill is visible.

I am sorry I lost the original link for the spacebar but I know I didn't download it on printables. If anyone has the link please lmk.

If you have any keycaps on your keyboard that don't fit the ones listed here, please comment and I will probably upload a new file. You can also edit the blender file to customize.