July 12, 2025
Description
Title says it all! Be careful with vertical clearance on the inside. I used double sided tape to mount the fans at first to the panel to check I can close it with the fans in the desired position.
Put painters tape on the panel and then use the mount to sketch the outlines onto the painters tape. Use a jig saw to cut out the holes (with some extra room around it, be careful to not get to close to the holes.
I melted heatset inserts into the fan and used M3x8, you can also use longer M3 screws and nuts. The screw head holes are sized for M3 SHCS.
I install this mod here:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Crys' Livingroom Workbench
