July 12, 2025
Description
The rear of the K1 series toolheads has a super fiddly cable management hook for the extruder wires. This guide made things much easier when I installed a new DXC extruder (highly recommended btw!).
Ideally, you just screw through the existing holes in the toolhead with M2x8mm bolts. I only had longer ones handy and maybe I'll cut them down one day but for now they work fine.
I'd recommend printing with 0.4mm nozzle and 0.2mm layer height to preserve detail. And you must use a heat resistant filament such as ABS/nylon etc.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
ᴄᴉᴚᴋᴉᴉᴛ
