AirTag Glitch Jigs

Need to glitch an airtag? heres the Jigs.

AirTag-Jig-SPI is to download the SPI flash.

AirTag-jig-NRF is used for glitching NRF, JTAG/SWD and FW dump/Upload.

AirTag-Base is used to contain 2 “loom Bands” and keep pressure on the AirTag

// Assembly: 
Get yourself a pack of female Dupont connectors and deshield one end.
Thread the stripped end up through the square hole into the round hole.
Pull the Dupont cable up until it snugs into place. (use a bit of glue if needed, depends on printer tolerances) 
Reshield the stripped ends.
insert the pogo pins into the “leggy” side of the jig.

Knot two loom bands together and thread it through the Base-v2 loop.
Place AirTag into the Base-v2 (PCB facing outward)
Carefully place (and gently bend if necessary) the pogo pins onto the traces.
Loop the loom bands around each of the jigs arms.

You can now run any glitch method you prefer.

//Glitch all the things, Print all the Jiggothys.