VRN-10s Pro Mod for Cr-10s Pro with Voron Stealthburner

Remixed from the Voron Switchwire x carriage, this mods lets you mount a Stealthburner toolhead on a CR-10s pro (tested) it could work with other CR-10 and Ender 3 style printers (not tested)

I run klipper but I use a octopus board and two IDC30 breakoutboards, (it was a mess, hope you can find a better way) but I got the two Z motors to work independently for Z tilt calibration, so firmware wise you are on your own. I also replace the Y axis extrusions for a 30mm longer ones to get enough travel so the toolhead can reach the entire buildplate since the nozzle will be moved forward, for this I drilled holes on the new extrusion ( same distance from the back as originals and used M5 flat or button head screws and did 2 blind joints on heach extrusion).

Print on ABS

Some renders show the endstop on the toolhead by mistake (the endstop stays were it is originally)

Thanks to the Voron Desing team for their great work!!

Afterburner files and instructions are available at https://vorondesign.com/voron_stealthburner