Core One Side Storage bottom low Box / Tray

Bottom low Tray with magnet mount for the Prusa Core One Side Storage from Prusa Guy

Printing recommendation: PETG, 0.4 nozzle, 0.2mm speed, no supports

For assembly you need:

2x magnet 12x6x3 (the magnet can be 12 to 15mm long)

Attachment: Be aware that the magnets have to be aligned with the magnets of the box.

Place the two magnets in the left and right bottom back corner and turn them until they are held by the magnet behind them (see picture below)

Place the box in front of the side storage in mounting direction. Remove the magnets from the corner without twisting them and press them into the corresponding recess in the tray.

Put the tray into the side storage.