Orange peeler / Orangenschäler

Object Description:

Orange peeler.

Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces.

If you need a version with a lower cutting depth or any other modification, don't hesitate to contact me.

Update from 2024-02-02:

Version with included mouse ears added which can be easily snipped off.

Update from 2022-03-28:

Print settings regarding brim updated.

Print settings:

Material: PLA

Layer height: 0,1mm

Infill: 20%

Perimeters: 3, 4 at the cutting head (already included in the 3mf-file)

Brim: not required with a good first layer adhesion, otherwise due to the thin end recommended. As an alternative, you can use the version with included mouse ears.

Support: no

All top surfaces ironed