July 17, 2025
Description
These are new legs for the 70" LG TV (Model 70un7070pua).
You will need to buy hardware if you don't already have some, these take (6) M4 X .7 bolts (Around 20mm long (1 1/2in) and you'll need some washers too.
FYI, the size and thread of these are the same as most cabinet knob screws, so if you have any of those laying around they should fit.
PRINT SETTINGS:
Any hard filament, but PETG or equivalent strength recommended
6 walls
30% triangle infill
Support needed for screw holes, tree slim is fine
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ
License:
Creative Commons — Attribution — Noncommercial
Matt Richardson
