DJI O4 Lite 19mm Adapter

This is a little spacer (printed out of TPU) that allows the DJI O4 Air Unit “Lite” to fit into frames that have spacing for a 19mm camera. It also allows for a small amount of vibration absorption since it's not very rigid.

I used the included M2 (ish) screws to hold this to the camera. These were “low profile” enough to not hit the frame thankfully. Then I then a M2x4 to attach this to the frame. The holes are slightly undersized and seem to hold the camera just fine.

Print Settings

Printer Brand:

Bambu Lab

Printer:

Rafts:

Supports:

Resolution:

Filament Material:

Notes:

Category: R/C Vehicles