July 19, 2025
Description
Simple desk stand for the Qudelix T71 to allow for the screen to be legible. Comes in 45 and 60 degree (pictured) variants.
Comes hollowed out so you can hide small things under the T71, like eartips or MMCX disconnect tools.
IMPORTANT: The tolerances are very tight, if you printer is not calibrated I recommend enlarging it by 2-3%.
Optional, stick some foam or rubber/silicone tape on the bottom so it doesn't slide around on your desk.
License:
Creative Commons — Attribution — Noncommercial
SPP
