Philips OneBlade 1-piece razor (lazy) case V2 magnetic sliding lid

2nd version of my Philips OneBlade 1-piece razor (lazy) case with a magnetic sliding lid and much more space usage inside the case with a few other improvements.

After print actions:

The case closes strongly and easily held by 4 pieces of 6x3mm round magnets. They are pressed into the case after printing. Check their orientation before adding them to the case, so that the case closes.

Parts needed:

• 4x 6x3mm magnets (Ø6mm, thickness 3mm) 

Printing instructions:

• 0.2 speed profile.
• No supports needed.
• No brim needed.
• To get the texts in a different color add a color change to the top part after 1mm print height and after about 2.4mm again to the desired color. To read how such a color change is done, you will find a really good article here.
• Fuzzy skin paint on option used too to give it a little more grip to be removed.
• Optional: Add extra texts to the base part if you want to in Prusa Slicer

Happy printing =)