July 20, 2025
Description
The goal was simple. Adjust my cpe wifi antenna (tenda o3) on balcony rails and aim it in the right direction. It works so I'm pasting my project with photos here.
ofc it's not the only one application for this shit. If you want to hang other stuff like bird feeder or Christmas decor feel free to do it ;)
Print with use of UV resistant materials (ASA/PETG) and AVOID PLA!
PLA is pure evil for such constructions. Good stiffness quickly fades away, over time the material bends and cracks.
You will need 3x m5 screws with washers
In my examples I used PETG from fiberlogy (all of their materials are quiet good)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Lukaszemko
