Vintage Pioneer SG SA Amp and Equalizer Parts

I made these as a replacement for my very worn SG-9500. They should fit other models too

You can try giving The parts for the switch a better finish with paint or just leave them the way they are. I recommend using a very fine print resolution. Be careful with the extenders for the broken off sliders, they are made to be used with glue. I used superglue but you should shield off the Front panel with e.g. Tape or it will leave white marks, you would have to clean with Aceton The replacement for the rubber part, that holds the Lightbulb is designed to be printed stiff but i think you can use flexible filament.

Aceton, Alcohol and Electronics Cleaner definitely were my best Friend while on this Project. I got this EQ in very bad shape and it was covered in thick, yellow tar from a smokers household. I am not a Professional but if you have questions or tips, feel free to ask!

Category: Other