July 25, 2025
Description
You will need the following to complete this:
Printed Parts:
| Number to Print | STL File Name |
| 1 | Screen Side Bracket |
| 1 | Side Bracket |
| 2 | Crossbeam |
| 1 | IntegratedRewinder_v5.6_75 |
| 1 | Axle v1 |
You will also need
(4) M3x10 screws to attach the Crossbeams to the Side Brackets.
(2) 608 bearings for the IntegratedRewinder
Please note that the Crossbeam has a side with a smaller cylinder on the outside. This side should be opposite of the Screen Side Bracket when attaching.
When inserting the built rewinder holder into the Filament dryer, insert the screen side bracket in first, similar to how the rods+bearings that the dryer came with are installed.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Stephen
