Sojag Genova Gazebo Govee String Light Mounts

I didn't like the hanging unkempt look of the Govee lights in our Sojag Genova Gazebo so I came up with some little clips that allow them to me mounted on the interior extrusion.  Originally I had intended to run the wires on top of the extrusion and secure in the little grooves in my clips but then found it looked cleaner if I tucked the wires in the groove in the underside of the extrusion.   I printed these in PETG with a .4 nozzle.  4 perimeters and 5 tops and bottoms.  I also used a very subtle Fuzzy Skin to dull down the PETG shine.  They can be kinda tight to push the clips together but I had good luck pushing down onto a table while preventing the legs spreading so they don't snap.