Holder for Dettol liquid soap dispencer and a bar of soap

For washing hands we use liquid soap from a Dettol liquid soap dispenser but also a bar of soap. We encountered a few minor annoying things:

1. Two kinds of soap take up more space
2. Liquid soap dispenser sometimes drips soap onto the counter
3. Bar of soap often gets very wet because of use

So I created a holder to solve the ‘problems’.

The liquid soap dispenser can be places in the lower part. The soap bar can be placed in the tray above the liquid soap dispenser.

The soap bar rests on several rounded spikes to prevent it from getting stuck to the surface it is placed on. Furthermore the rounded spikes have space around them were the water can escape. This water flows toward a vertical tube where it flows down. At the bottom the water flows to the front.

The total holder has a depth so that the nozzle of the liquid soap dispenser hangs above the sink, not above the counter. Also the water which comes from the soap bar after usage will flow into the sink.

The model contains 2 parts which can be printed without supports. Extra needed are 5x M3 screws of about 20mm to 30mm in length.