JUXINICE USB Cable Mount for 30x30 extrusion

I run a MK3S+ with Klipper and as part of that, mounted a Raspberry Pi to the printer. I route the USB cable for power to the Pi outside of the box and wanted to secure it to the chassis with a mount, hence this model.

Requires two M3 square nuts, M3x6 bolt to secure it to the 30x30 extrusion, and anywhere from M3x6 to M3x12 to clamp the cable in the mount.

You can insert this into the extrusion sideways and twist it into place.

Print with 4 perimeters, 0.2mm structural, PETG