Corner pads for clamps - Action (brand) Clamps 43 x 30 mm

Clamp mounting pads for precise right angle assembly. Made for Action (brand)  clamps, but this size will fit other similar ones. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes. The larger one for large parts has a height of 60 mm and the standard one has a height of 30 mm. If there is a lot of interest I can create other models in other sizes.

Print from PLA, PETG.

• Easy to use
• Strong enough
• Filament saving
• Best print at draft 0.28 layer, 15 % Gyroid and 3 perimeters

Just print and enjoy it :)