Compact "KVM Field Kit" Storage Box

The case is based on my parametric “Rugged Box” .

Every now and then I have the need for a compact and portable KVM (Keyboard, Video & Mouse) setup which I can easily carry with me. Therefore I created this little KVM Field Kit (most of the components used are listed & linked below).

The (blue) insert can be used as a stand for the 7" display.

Assembly

You will need six M3x30 screws to assemble it (s. below). 

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Screws

I like these screws which have a nice round head:
Allen hex socket button head screw

Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws

Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.

Main Components of the KVM Field Kit

• 7 Inch Mini TFT Monitor (1024x600)
• 2.4GHz Mini Wireless Keyboard With Touchpad
• 10Gbps RJ45 Connector Female to Female
• Cable Wire Straps
• VGA Cable with flat cable
• USB C 3.1 To RJ45 Console Cable FTDI Chip Serial Wire RS232