Multibin Insert for YATO YT-6161 – Needle File Set

This is a 4x2x0.5 CU insert for a set of six YATO needle files (160 x 75 mm). 

The side for the handles is deeper, so you can press on the handle for the business end to come up, making it easier to grab.

Either paint the markings in your slicer if you have a filament changing printer or add a color change at a height of 16 mm (layer 80) to make the form markings pop out. When using a color change, the border of the insert will change color too.

Print settings

Print with usual Multiboard Settings:

• 0.4 mm nozzle
• 3 perimeters wall thickness
• 0.2 mm layer height
• 15% infill
• no supports

Apart from that, use your printer's default settings.

Updates

• 2025-08-02 v2: Slightly increased the depth because I noticed some of the files might catch stacked bins.