Withings Body Scan Handle Wall Holder

Handle wall holder for Withings Body Scan to be screwed to your wall.

I did not trust the glue tape variant that was included with the scale for the long term. 
So I made this one to be fixed with screws to your wall.

Parts needed:

• 2x dowel 6mm or 8mm
• 2x screw 6mm or 8mm (Holes in the part are 5.5 mm with 12mm for screw heads) 
• 1x Withings Body Scan

Printing instructions:

• 0.20 speed profile.
• No supports needed if you print the part in the below shown orientation.
• No brim needed. 
• Fuzzy skin paint on option used too to give it a little more texture to the print.

Happy printing =)