Prattle Pins from keeper of the lost cities.

These are some prattle pins from the book series Keeper of the Lost Cites. I got the photos that I turned into relief sculpture here.

Powered by Relief Sculpture Maker from MakerWorld (https://makerworld.com/makerlab/
reliefSculptureMakerV2)

Print Instructions:

Flareadon, Sasquatch, etc.:

Brim: Yes.

Supports: Yes.

Layer height: 0.2.

Nozzle size: 0.4.

Orientation: 

Pins:

Brim: Yes.

Supports: No.

Layer height: 0.2.

Nozzle size: 0.4.

Orientation: As loaded in slicer.

Non-Printed Parts

1 1/16 in safety pins.

Assembly

Insert the safety pin into the slot, than put the pins in and glue or plastic weld the pins in.