Synology Push Lock Latch part

This part is to replace the lock/latch on the Synology drive caddy/tray. This piece is recommended for Resin printing, but FDM can work well.

This part is very tiny (~15mm in length) - Excellent bed adhesion is REQUIRED.

Note:

The added tiny brim under the blue diamond should be on the build plate, see the snapshot. It's best to print at least 4~6 pcs at once and space them apart at least an inch or two. Make sure the parts get enough cooling time and stick to the bed well.

Speed:

Initial layer - 10mm/s

40mm/s overall (or less)

Quality:

0.8mm/layer

Feeling lazy? Order the part completely:

https://www.amazon.com/gp/product/B0BWJ8LPC3