3x 40mm Fan bracket for Jonsbo NV10 Mini ITX Case

Introduction/Support Me:

If this 3D design helps you optimize your PC's cooling, please consider hitting "Like" on this model file! Your support encourages future designs. You can also support my work by purchasing items for this setup through my affiliate links below:

• 40mm fan Noctua NF-A4x10 PWM https://amzn.to/4lOnWE8
• GPU: Gigabyte RTX 5060 Low Profile https://amzn.to/3IaejRs 
• Case: Jonsbo NV10 https://s.click.aliexpress.com/e/_omOmPzq 
• Motherboard: Asus Rog Strix B760-i https://amzn.to/4kFm8fD 
• CPU: Intel Core i5-13500T: 14 cores, 20 threads (6P + 8E), 35W TDP https://amzn.to/3G7Oq4c 
• CPU Cooler: Thermalright AXP-90 X36 Black Low Profile CPU Air Cooler https://amzn.to/3IaaNqc 
• G-SKill Trident Z5 RGB 32GB (16GB x2) DDR5 5600MT https://amzn.to/4evV14W 
• WD Blue SNS80 PCIe 4.0 NVME SSD 1TB https://amzn.to/4lkriPi 
• Power supply: Enhance ENP-7660B 600W 80 Plus Platinum PSU https://amzn.to/3IkTWkG

Disclosure: As an Amazon Associate, I earn commission from qualifying purchases. This means that if you make a purchase through my affiliate links, I may receive a small commission at no extra cost to you.

Overview:

This 3D printable fan bracket is designed specifically for the Jonsbo NV10 Mini ITX Case, allowing you to install three 40mm fans to significantly improve airflow and cooling, especially crucial for systems equipped with a demanding GPU like the RTX 5060.

An RTX 5060 GPU generates a lot of heat. While you can undervolt the GPU, without effectively exhausting the hot air, it will get trapped inside the case and cause the entire system to overheat. This fan bracket addresses that issue by providing dedicated exhaust for concentrated heat.

The fan bracket 3D model file allows you to install three 40mm fans for the Jonsbo NV10 Mini ITX Case. The design ensures a precise and secure fit, locking into place between the existing screw standoff rails of the case.

Concept Design for Solution:

My idea was to design a 3D model fan bracket that fits precisely between the existing screw standoffs within the Jonsbo NV10 case, allowing it to lock securely in place without additional fasteners. By utilizing the existing structure, the installation is straightforward and robust.

When designing something to fit a standard size, a helpful tip is that you often don't need to take measurements yourself. Instead, you can simply use the technical data and specifications for the specific item, such as these 40mm fans and the case dimensions, to create your 3D model. This approach ensures a perfect fit without extensive trial and error or "hard work."

The installation is simple:

1. Install the fans onto the 3D printed bracket.
2. Align the bracket at its position within the PC case and slide it in. It should fit snugly.
3. Connect all three fans to the motherboard using the cable splitter that came with your fans.
4. Finally, perform some cable management to ensure optimal airflow and a tidy build.

The 3D-printed fan bracket will lock in place between the two long standoff screw rails, providing a stable mounting point for the fans.

Print Recommendation Material:

I printed this fan bracket using ABS material. I strongly advise against printing it with PLA or PETG filament. This is because components inside a PC case, especially near a powerful GPU, can reach temperatures well over 60°C (140°F) during heavy load.

• ABS has a higher heat deflection temperature (typically around 90-105°C), making it much more suitable for this application to prevent warping or deformation.
• PLA begins to soften and deform at much lower temperatures (around 50-60°C).
• PETG offers better heat resistance than PLA (around 70-80°C) but may still be susceptible to deformation under sustained high temperatures in a confined PC environment.

For optimal durability and longevity, ABS is the recommended material.

Fan Noise Observation:

Once installed, observe the fan noise. While three 40mm fans will certainly move a lot of air, the noise level will depend heavily on the specific fan models chosen and their RPMs. Undervolting your GPU can help reduce overall system heat, which in turn may allow the fans to run at lower, quieter speeds.

How to install?