Prusawire Supplemental Badge

A supplemental badge that changes the "PRUSA" text on the frame to "PRUSAWIRE" with the Positron logo to the side.
 

There are 2 variants of this available:

1. “Easy Mode” - The part is printed as a single piece with an optional filament swap when the text + logo starts.
2. “Hard Mode” - Splits the text and back to allow for the bottom layer to be visible. This is pictured above. The text is intended to press-fit without adhesive, but might require pliers to press down. Consider printing 2 copies of the text in case part of the first layer separates from the bed.

Consider printing the back in black to match the frame and the text in the accent color used for the printer. This is probably safe to print in any filament that sticks to double-sided tape (the frame is not magnetic, so magnets aren't an option), but using the same filament used for the printer parts is recommended to match colors exactly.

The picture uses “hard mode” with Black Polymaker ASA and Red Inland (Micro Center) ASA using 0.2mm layers and a 0.4mm nozzle. 0.5mm nozzles (covered in the Prusawire documentation) are untested and might result in issues printing the text.