Adjustable VESC Onewheel Stand

Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more.

The “foot” of the stand attaches to the “base” of the stand using:

• Four M5x20, M5x25, or M5x30 countersunk screws

• M5 heat set inserts

Printing Instructions

Print in your preferred material with as much infill as you like, but here are some print settings recommendations:

• 20% or higher infill should be plenty strong

• Supports disabled

Once configured:

1. Print the model on its side, with no supports.

2. Take it off your print bed when it's done. Boom.