Yarn cone winder v2 - motorized ver.for JGA25-370

This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor.

In the remix, I added:
- GEAR_24 version for the JGA25-370 motor
- YARN_Housing_bottom version for the JGA25-370 motor
- YARN_Housing_bottom version for the JGA25-370 motor with six M3x5x4.2mm heat inserts

Parts needed:

• M6 rod 147 mm (grooved drum fork shaft)
• M6 rod 66 mm (winding shaft)
• M6 rod 20mm (connection between upper and lower grooved drum cap, loose fit)
• M6 nyloc hex nuts (manual 4x, motorized 3x)
• M6 normal hex nuts (manual 2x, motorized 1x)
  - lock big gear in place (only in manual version)
  - top of fork shaft (so you can hand-adjust how tight or loose the drum fork can move)
• M3 screws 6mm (manual 4x, motorized 11x)
• M3 screws 20mm (2x, fork arm)
• M3 screw 35mm (1x, yarn tensioner)
• M3 hex nuts (2x, fork arm inside housing)
• Skateboard bearing 608-2RS (3x)
• short rubber band (for grooved drum)
• long rubber band (as drum fork spring, not too strong!)
• six M3x5x4.2mm heat inserts (OPTION)

Link to the kit(affiliate link):
JGA25-370 motor along with 12V DC speed controller.