RC tyres OD85mm=3.3" ID48mm=1.9" W38mm=1.5"

Warning

Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones.

Printing

According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with a thicker tyre casing).

Print all the tyre parts whith à 100% infill. 

Except the foam part where I use 5% infill with TPU 95A (but for a heavier model or a softer TPU filament increase the infill).

In your slicer :

• for the left tyres :
  • keep only one left sidewall (delete the others)
  • keep the right noname sidewall
• for the right tyres :
  • keep only one right sidewall (delete the others)
  • keep the left noname sidewall

You can set a change color for the 2 last layers to hightlight the brand.

Feedback

It is welcome.

Remark

Several tyres with different inner diameters and widths are available. If you need a specific size you can request; if it is easy I can do it with a one month delay max and free.

I will create later some tyres with bigger outter diameters. 

Version

v1/v20250728