RJMP-01-08 Bearing Holder

Bearing holder I designed so that I can use Igus RJMP-01-08 bearings in my prusa mk3s printer. 

• You should use it with M3 countersunk head bolt. 
• You should use it with a fiber nut.
• You should deepen the countersunk in the bolt path with a countersunk drill bit so that the bolt head does not hit the printer frame after printing.

The design I was inspired by;

https://www.prusaprinters.org/prints/47723-zodiac-misumi-diy-y-carriage-clipper

0.2mm resolution

Abs or pet-g