August 21, 2025
Description
Wanted a replacement sleeper jam door for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU.
This is a replacement drop in jam door replacement for the stock jam door. This adds an easier way to open the door and also gives you a small mounting point for picatinny accessories.
Printing Instructions:
Print the jam door upside down with support for the screw port.
Hardware Requirements:
Jam door required 2 M3 heat inserts. they should not be longer than 4mm. Here are the ones I use. https://a.co/d/2n3pchR
The rail requires 2 - M3x12mm screws for mounting.
The thumb screw requires an M3x20mm screw.
License:
Creative Commons — Attribution
11
thepaperskeleton
