Accessory Box with Magnetic Lid for Bambu Lab A1

The model is to be lightweight while having a relatively large volume. It has 1.2mm wall thickness and requires about 90 gr of filament. It has a magnetic lid that protrudes 5mm for easier lifting. It is designed to be slotted to the right side of Bambu Lab A1.

Dimensions: 15cm × 10cm × 5 cm (width × height × depth). Lid has a 0.5cm protrusion (15.5cm wide).

Non-printed Part Requirements:

• 4 x 2mm circular magnets → Quantity: 8 → For the case lid
• Super glue → For glueing the magnets in place

Check out my poop bucket with integrated deflector for A1: Bambu Lab A1 Poop Bucket.

You have my permission to improve the model, share it, produce it, sell it. Just don't re-upload it without any changes (basically don't have malicious intent). I added the SolidWorks and STEP files so that you can edit easier. If you are using Onshape, you can copy and edit the entire project using the link below.

→ Model Link on Onshape ←

Huge thanks to @vajojajo for the awesome Bambu Lab A1 CAD model. Because of that model, I didn't need to measure anything myself.

Check out my other Bambu Lab A1 accessories:

Maintenance Tools & Box (Lubing & PTFE Tube)

Poop bucket with a deflector (70 grams)