IKEA TRADFRI Motion Sensor Angled Corner Mount and AAA tray

I hacked these parts together as I needed a battery tray and an angled corner mount for my IKEA TRADFRI motion sensor

This is the AAA conversion mount. My tray fits inside the mount. Wire the batteries in series so you get +3 Volt.
https://www.thingiverse.com/thing:5156127

This is a dirty hack but works. I removed the top screw hole from the adapter and added screw holes for the angled corner. This is done in the .3cmf file. Warning, only one screw hole aligns as spaced them 15mm from the center of the part.

I soldered a connector to the terminal but you may be able to use this instead
https://www.thingiverse.com/thing:5151225

I'll post an alternative model on PrusaPrinters once my second sensor shows up.