3U Hard Drive Bay for 8x 3.5in HDDs for 10" Mini Rack

M4 Heatset

• src 1

• src 2

12

M3 Heatset

• src 1

• src 2

8

M4x5mm
(BHCS preferred)

7

M4x10mm
(BHCS or SHCS)

5

M3x10mm
(BHCS preferred)

8

Jonsbo N3 Backplane

• src 1 (verified)

• src 2

• src 3

• src 4

I also designed a 7-drive version that doesn't use a backplane

1

40x40x20 Case Fans

• src 1

• src 2

4

3 Pin Fan Splitters

2

Coolermaster Drive Sleds

• src 1 (verified)

• src 2

• src 3

or printed parts (in files list)

• src 1 (you are here)

• src 2 (labman)

As needed

Uses:

• 5 of M4 heatset

Install the heatset inserts into the drive mount printed part.

Uses:

• 7 of M4 heatset

Install heatset inserts into the backplane mount printed part where the backplane will go.

Uses

• 8 of M3 heatset

Install heatset inserts in diagonal pairs in the bolt holes of your fans, on the side of the fan that doesn't have a grill.

Uses:

• 7 of M4x5mm

Bolt the backplane to the backplane mount.

Feed the fan wires through the fan cutouts then slide the fans into the fan cutouts.  Make sure that the fan wires end up in the rectangular part of the cutout. 

Uses:

• 8 of M3x10mm

 Bolt the fans into position through the backplane mount and into the fans.

Uses:

• Small zip ties

Zip tie the pairs of fan wires using the zip tie pockets.

Uses

• 5 of M4x10mm

Bolt the backplane mount onto the back of the drive mount.

Install the bay into your mini rack.

Wire up your drive bay