RIBBED VASE WITH INLET & PENDANT / ICONIC VASE

Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/

Hello everyone :)

Today we would like to introduce you to our new vase creation, which comes in a very elegant "ribbed" design. The vase is printed in vase mode, as is the inlet. In addition, we have modeled a small pendant to round off the whole design.

Please make sure that all layers have been printed properly. Otherwise there may be a leakage of water. If you have problems with this, then print the INLET without vase mode.

I ADDED THE PENDANT AS .STP-FILES. SO YOU CAN EDIT THE PENDANT.

★ DOWNLOAD CONTENT

• VASE
• INLET
• PENDANT

★ MOUNTING INSTRUCTIONS:

• SEE PICTURES

★ RECOMMEND PRINT-SETTINGS (LAMPSHADE):

• Filament: Bambulab PLA Matte white, black (used in our make)
• Infill: 0%
• Layer Height: 0.2mm
• Walls: 1
• Nozzle Size: 0.4mm
• Support Structure: None needed, ensuring a hassle-free printing process.
• Brim: None needed, but when you have adhesion problems than activate the brim
• Vasemode Settings  (Settings --> Other --> Spiral vase): Activate

Follow us on Printables and Patreon for more elegant and functional designs.

Support us on Patreon to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere:

https://www.patreon.com/sektor7_studios
 

Greetings

Leon from Sektor 7 Studios