Raspberry Pi Zero and Ethernet/USB Hat Enclosure

This is an enclosure for a Raspberry Pi Zero and an Ethernet/USB Hat.  This works for both the Raspberry Pi Zero and the Raspberry Pi Zero 2W.

I recommend using support for the backplate, as the heat insert holders will need support.  Using support on the baseplate is optional, as long as your printer can handle bridges well. 

Additional Items needed for assembly:

• 6x M2*2*3.2 Heat Inserts
• 6x 4-6mm M2 bolts

Specifically made to work with this Hat: https://www.amazon.com/dp/B07X1BH5FN?ref=ppx_yo2ov_dt_b_fed_asin_title