PRAKI Cereal Container Dry Box Hygrometer Remix

No hardware besides the 608 bearings and PC4-10 fittings. No drilling required.

This is the same as the original, except adding a stand for a hygrometer and a different design for the desiccant cover that prints much faster (7 min vs 18 min on CORE One 0.2mm speed).

I've also included a project file that has all the printed parts together on a single plate with the required custom supports on the bottom frame. Total is ~4 hour print time with PLA on CORE One 0.2mm SPEED profile.

There is also a file that is just the hygrometer stand for retrofitting existing makes of the original. Use CA glue to adhere it to the frame.

Fits commonly found hygrometers e.g. https://www.amazon.com/dp/B07MCGDN5C