Headmame V2 M3 clamps

BOM:

• 4 M3x10 BHCS
• 4 M3x3x5 heatsets (shorter than Voron spec) - I used these: https://www.amazon.com/dp/B0C4GDBXML

Print as per normal headmame V2 specs, including painted supports on the covers. Install 2 M3 heatsets into covers with a soldering iron/heat insert press.  Affix the same way to the spring but this time you will use an M3x10 BHCS instead of an M2x10 self-tapping screw.  It's much easier to get the alignment in place, and I did not even need to modify the included leather headband.