Fully 3D Printed Curtain Rod Kit

This is a curtain rod designer for small curtains. PETG is recommended as printing material. 

Recommended settings:

• At least 4 wall loops (I suggest 6 or even 8).
• At least 15% infill
• Enable supports
• Adjust cooling to the lower side to improve layer adhesion. 

Important: due to the size of this part, it barely fits the bed of an MK3/MK4 printer. I leave a .3mf file with the proper orientation. 
In the future, I will add another length, so it can fit on most printers with 220x220mm beds.