TTRPG Siege Tower

NOTE: REORIENT ALL SIEGE TOWER BODY PARTS TO BE “FRONT” DOWN TO PRINT WITHOUT SUPPORTS. (I originally did this on an older program I no longer use). 

Fits a total of 12 minis inside; there are three levels with four minis per level.

My DnD Campaign needed some Siege Towers for a big battle we had planned, so I threw these together. These have a working, print-in-place hinge door. In my experience it took some careful prodding to free it, but I was also printing in wood-PLA, so print quality wasn't the greatest. It does work in wood PLA if you want that appearance for it. 

There are both arrow-slit and non-arrow-slit versions, for archers. 

There are also two different wheel variants; if you want to have it sit on the wheels (which do not spin) you can print the whole-wheel versions, or the flat-bottomed wheel versions to have it sit on the 4in base. 

This will be a largely walls-only print, so infill doesn't matter too much. 
It is designed to be print-in-place and support-free, but that does require some large bridges. Assembly will require some super-glue.