key storage

Hello,
Here is a key organizer model that doubles as a key ring. You can customize it as you wish with the "card" model.

You will need:

The key ring to hold approximately 12 keys and 2 badges.

To attach the badges, you must use the "filling" models and cut the mesh to attach your badges.

you need 4 nut M4, screw M4x20 and 30mm diametre key ring

for the "bottom" model insert the bolts and the ring please stop printing at the right layer, insert the bolts and the ring then resume printing

Ideally, please proceed in this order:

• screw
• card
• top
• filling for the top
• lid
• metal ring
• keys
• lever and lever mirrior
• metal ring
• lid
• filling for the bottom
• bottom

Optional: You can use the "rondelle" model to fill in the missing key spaces, this will balance the key storage

tuto: for each stage oh the photo

1- screw + top (+card below)

2- filling for the top+ badge

3- lid

4- metal ring +key ( optional + rondelle)

5- lever and lever mirrio+ metal ring

6- lid

7- bottom+filling for the bottom+ badge

8- assemble

Thank you for your feedback.