Blinds Loop Cord Tensioner

Bind Cord Tension Device compatible with continuous cord loops. The spring-loaded design maintains cord tension.

1x Screw, 3mm x 12mm
1x Compress Spring, 9/32 x 3/4

Infill: 15%
Brim: Yes, outer only (if printing ABS or ASA)
Support: Yes, Tree

Note: Assembling is best done by inserting the two sides together at the end opposite the wheel and then pressing them together, moving towards the wheel.  The wheel end may require some additional pressing to get the center hubs to snap in place. The tight fit ensures it will not come apart accidentally.