Carvera Air GoPro mount

⚠Disclaimer⚠

Use this model on your own risk. I will not be responsible if you damage your CNC or device using this model.

Putting a $300+ camera near a bit rotating at 10000 RPM is maybe not the best idea ! I'm dumb, this does not mean you have to be.

Also some details are missing and instalation process is not the clearest for now, I will update the model later with exact information (screw sizes) and photos for installation process

Introduction

This is a model that allow you to place your GoPro compatible device to film your milling operation on your carvera Air

This model is compatible with air assist but is not with the vaccum shoe.

Needed parts

1 M4 screw (I don't remember the size, medium like 8mm to 14mm long)

2 M3 screw (I don't remember the size, small like 4mm long)

Instalation

1. Remove the stock vacuum hose holder
2. Remove the probe holder
3. Place the holder by first placing the probe screw riser inside the hole then rotate it on the vacuum hose holder screw riser
4. Screw the holder with 1 M4 screw on the vacuum hose holder and 2 m3 screw on the probe screw

Usage

• You will not be able to use the vacuum shoe provided by maker, I'm working on a compatible vacuum shoe that I'll share later. To clear up debries and have good shots use the air assist.

Model used

The gopro mount used is from this model: https://www.thingiverse.com/thing:4760321

Example

Most of the shots from those two shorts have been made using a similar model :