December 16, 2024
Description
DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan.
Prints without supports.
Printed in PETG at layer height 0.2mm.
I mountend the Raspberry with M3 brass standoffs. The Raspberry is designed for M2.5 screws! I used a 3mm drill bit to make the holes larger!
Fan Mount is designed for M3 heat inserts.
The fan mount has clips to hold the fan in place. I didn't use screws for the fan. The fan mount is designed for a 60mm fan (60x60x13.5). There is a version with a cable guide for the Raspberry Pi Camera and one without it.
Update 27.10.2023: fan mount for 60x60x25 mm fan added.
DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)
Hardware needed:
License:
Creative Commons — Attribution — Noncommercial
7
Farnsworth
