February 24, 2022
Description
Mount for Raspberry Pi Camer V2.1 for the front left corner on a RatRig V-Core 3.
Place the camera module into Pi_Cam_Back and push Pi_Cam_Front into place. I didn't need to use glue.
Insert he clips for the camera cable into the 3030 extrusion and turn 90 degree. They have a very tight fit!
Prints without supports.
Printed in PETG at layer height 0.2mm.
Hardware needed:
License:
Creative Commons — Attribution — Noncommercial
7
Farnsworth
