RatRig V-Core 3 IEC Adapter remix

Quick remix of https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount and https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig to fit the iec-adapter I had ordered.

I added holes for the screws to the iec-adapter and redrew the back cover, becaues it was a bit to small for myiec-adapter.

I only used two of the four holes to mount the front plate to the 3030 extrusions.

Prints without supports.

Printed in PETG at layer height 0.2mm.

Hardware needed:

• M6 bolts and nuts for 3030 extrusion for the surface mount part, 4x
• M3 bolts and nuts for screwing on the back cover, 4x M3x10 mm
• M3 bolts and nuts for screwing on iec-adapter, 2x M3x10 mm