BIGTREETECH HDMI5 Display Voron Mount (V1.2 Version)

Edit: This was found to be incompatible with the original model's mount. There is a working design for the Prusawire, but no Voron mount exists yet.

This remix is intended to be a drop-in replacement for the “BTT HDMI5 Display Case Symmetric” of BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door) for use with the BIGTREETECH HDMI5 V1.2.

The only provided file is the display case. All other parts can be downloaded from the remixed model. The assembly instructions are otherwise almost identical, with the exception being that the HDMI and USB-C data go out the back instead of the side. It is recommended to use “BTT HDMI5 Cable protector-180 deg” on both sides as opposed to the open option since it isn't needed on V1.2 of the display. V1.1 is untested and probably incompatible due to the display cable ribbons. The speaker and buttons are intended to be towards the bottom.

As shown, a combination of black Polymaker ASA and red Inland (Micro Center) ASA was used. “Voron spec” print parameters were used (4 perimeters, 40% infill, 5 top and bottom layers, 0.2mm layer height), although all can probably be changed without any side effects.